Ceiling carpet came unstuck
morgans2
Reg. Mar 2005
Posted 2013-06-12 3:02 PM (#152661)
Subject: Ceiling carpet came unstuck


Member


Posts: 9

Location: Stevensville, MT

I have a 2001 KB trailer with a Showtime conversion.  The carpet on the ceiling is no longer sticky and sags a bit.  What can I use to stick it back up?  I can get to that part of the ceiling  by loosening the lights in the ceiling.  Thanks.

share Top of the page Bottom of the page
CYA Ranch
Reg. Feb 2009
Posted 2013-06-12 10:08 PM (#152681 - in reply to #152661)
Subject: RE: Ceiling carpet came unstuck



Member


Posts: 47
25
Location: South Dakota
If you can get to it use spray on adhesive.
share Top of the page Bottom of the page
Linda Y
Reg. May 2007
Posted 2013-06-13 8:02 AM (#152694 - in reply to #152661)
Subject: RE: Ceiling carpet came unstuck


Extreme Veteran


Posts: 342
10010010025
Location: MS
Make sure the adhesive you use is for putting up car ceilings. Anything else, the heat will make it get gooey.
share Top of the page Bottom of the page
gard
Reg. Aug 2007
Posted 2013-06-13 10:53 AM (#152703 - in reply to #152661)
Subject: RE: Ceiling carpet came unstuck


Expert


Posts: 5870
50005001001001002525
Location: western PA
http://www.amazon.com/3M-38808-Headliner-Fabric-Adhesive/dp/B004MEBENM
share Top of the page Bottom of the page
cajunmuleman
Reg. Oct 2011
Posted 2013-06-13 4:18 PM (#152715 - in reply to #152661)
Subject: RE: Ceiling carpet came unstuck



Elite Veteran


Posts: 656
5001002525
Location: Rayne, LA

Another product that works well is spray adhesive used for air conditioning duct insulation which is probably very similar to what Gard suggested

http://tapes.berryplastics.com/SearchProductsDetails.aspx?ID=96

 

share Top of the page Bottom of the page
morgans2
Reg. Mar 2005
Posted 2013-06-17 7:10 PM (#152829 - in reply to #152661)
Subject: RE: Ceiling carpet came unstuck


Member


Posts: 9

Location: Stevensville, MT
Thank you, I will try to see what I can find at either an auto parts store or Home Depot.

Edited by morgans2 2013-06-17 7:12 PM
share Top of the page Bottom of the page