Manual Jack Issue on Equalizer AM Series
Covert Cowboy
Reg. Mar 2007
Posted 2023-11-15 7:58 AM (#185650)
Subject: Manual Jack Issue on Equalizer AM Series


Regular


Posts: 79
252525
 I have an older Equalizer AM series that is not working correctly. I'd like to take it in to get serviced or replaced, but the manual crank is not working. Based on the documentation and videos - there should be some sort of red knob here to turn to release the pressure. As you can see, I don't have anything red on this part.

I don't know if something is broken off or missing. Anyone know what I need to do to get this thing on the truck?



(jack2.jpg)



Attachments
----------------
Attachments jack2.jpg (89KB - 0 downloads)
share Top of the page Bottom of the page
tobruk
Reg. Oct 2003
Posted 2023-11-15 3:35 PM (#185651 - in reply to #185650)
Subject: RE: Manual Jack Issue on Equalizer AM Series


Veteran


Posts: 188
100252525
Location: White Pine, TN		Call EQ systems, their customer service dept is great on trouble shooting problems.  800-846-9659.  I think Kevin is the guy in tech support.  Very knowledgable.  There should be a lever that pulls/pushes that make the manual change directions.  Don't know about the "red." 
share Top of the page Bottom of the page
Covert Cowboy
Reg. Mar 2007
Posted 2023-11-15 3:53 PM (#185652 - in reply to #185650)
Subject: RE: Manual Jack Issue on Equalizer AM Series


Regular


Posts: 79
252525
The leveler is on the other side of the jack from this picture. Level works, but it only goes up. I need it to come down.

I'll try Equalizer customer service again. They were not very helpful previously.
share Top of the page Bottom of the page