Posted 2015-06-15 10:25 AM (#163776) Subject: F350 regular bed + snub nosed gooseneck
New User
Posts: 2
Location: Ohio
I have a 2012 F350 crew cab with a regular bed (6' 10"). When I bought it, I intended to get a simple 2H gooseneck trailer with dressing room and aero-nose. Now I'm thinking about getting a trailer with small living quarters, most of which are snub-nosed. I'm concerned about maneuverability with that truck/trailer combo. Does anyone haul with a similar rig? What are your experiences with cab clearance? Thank you!
Posted 2015-06-15 11:28 AM (#163777 - in reply to #163776) Subject: RE: F350 regular bed + snub nosed gooseneck
Expert
Posts: 3802 Location: Rocky Mount N.C.
All my gooseneck truck have 8' beds, I still use a 9" extender to move trailer bulkhead wall away from back of truck..... Now, what is a snub nose trailer?http://www.mrtrailer.com/poptour.htm
Posted 2015-06-17 9:35 AM (#163796 - in reply to #163776) Subject: RE: F350 regular bed + snub nosed gooseneck
New User
Posts: 2
Location: California
I have a 2008 F250 crew cab regular bed and have hauled both flat and aero nosed gooseneck trailers (Featherlite and Sundowner) with B&H turnover ball. No problems at all.
Posted 2015-06-18 9:58 AM (#163810 - in reply to #163776) Subject: RE: F350 regular bed + snub nosed gooseneck
Veteran
Posts: 147 Location: santa clara, ca
We have a F350 SB with a B&W 4" offset "adapter" (http://www.etrailer.com/Balls/B-and-W/BWGNXA4685.html?feed=npn&gclid=CJ7w4o3XmcYCFY17fgode6cC0g) works really well: our trailer is not a full 8ft wide, but we can still make almost 90 degree turns.It might help to sketch it out on a piece of paper to roughly see the max angle you would be able to achieve (this will dimishis if there is a pitch between truck and trailer, backing up/down hill)
F350 regular bed + snub nosed gooseneck
