Posted 2015-11-12 9:44 AM (#165364 - in reply to #165363) Subject: RE: One more Elite question....
Regular
Posts: 74
For those of you with an Elite Stock Combo or other Elite stock trailer.....Do you have a folding rear tack? How is it attached, and does it fold fairly flush against the trailer wall When not in use. Comments or a picture?
Posted 2015-11-12 6:15 PM (#165373 - in reply to #165363) Subject: RE: One more Elite question....
Expert
Posts: 1989 Location: South Central OK
My stock combo did not have (nor added) a folding rear tack, I got the dressing room expanded to 6' and had a removable saddle rack added in place of the permanent one. I will use mine as a stock trailer when hauling the adult cattle and having the rear tack would block my sliding calf gate in the rear door.
Posted 2015-11-15 5:33 PM (#165387 - in reply to #165363) Subject: RE: One more Elite question....
Extreme Veteran
Posts: 402 Location: Valentine, NE
Looking and wondering the same thing on an Elite. Kicking around just a normal Elite stock trailer with a rear collapsible tack. Don't really need the room a 2-3' short wall provides on a normal stock combo and want the saddle racks easily accessible from the ground.
Posted 2015-11-17 3:13 PM (#165401 - in reply to #165363) Subject: RE: One more Elite question....
Extreme Veteran
Posts: 402 Location: Valentine, NE
In looking at pics on the web, it appears it depends on how wide the trailer is. If any of the wheel fender is inside the stock box, the bottom 2' of the folded back rear tack wall, fits up against the wheel well when folded in. The upper part of the rear tack wall sticks out about 6" is my guess.
I had a Titan that had a folding rear tack, no managers, and no inside wheel well. It stuck out about 6-8" when folded back.
One more Elite question....
